• Call us : +91- 9820062413

Bacteriological Incubator

Bacteriological Incubator Manufacturers, Suppliers and Exporters

line
img
img
img

This Bacteriological Incubator are made as per guideline of GMP supplied with IQ OQ & PQ document with calibration report for PID controller.

FEATURES:
Triple walled construction
Inner made of S.S.316 mirror polished
Outer made of S.S.304 Dull finish
Gap between the two walled filled with glass wool insulation of 65 mm
Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing
Heaters are placed at the right & left side of the inner chamber
PID Controller with auto tuning facility with double display to view set & current temp
Temp. Range 5 °C above ambient to 60 °C with accuracy of ± 0.5 °C.
Silicon rubber gasket fitted on door to prevent lost of heat
Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali

OPTIONAL ACCESSORIES:
Digital Timer to cut off the heater at set interval
PID Controller with Printer interface to record
Set Valves & actual valves data & Time
80 Column DOT MATRIX Printers
Safety controller with alarm for Temp. Overshoot
Single 4 point/8 point data logger

BACTERIOLOGICAL INCUBATOR GMP MODEL IS AVAILABLE IN BELOW SIZES:

Inner Size Size in Inches (W X D X H) No.of Shelves Capacity In LTR Rating Watts
12" x 12" x 12" 1 27 250
14" x 14" x 14" 2 42 300
18" x 18" x 18" 3 90 400
18" x 18" x 24" 4 120 700
24" x 24" x 24" 4 215 1000
24" x 24" x 36" 5 320 1500